极速快3计划

服务热线: 400-117-8816 

专注于扭剪型电动扳手、扭剪型手动扳手、定扭矩电动扳手、扭矩倍增器的研发与生产

热门关键词: 扭矩扳手产品的好坏是怎么区分的? 扭矩电动扳手点检项目和点检时间 拧紧M20用电动扭剪扳手能够吗? 选择电动扭矩扳手厂家时需要考虑哪些因素

当前位置:极速快3计划>极速快3计划>如何处理电动扭矩扳手忽然不能用的问题

如何处理电动扭矩扳手忽然不能用的问题

来源:http://haochahe.com 日期:2019-07-22 发布人:admin

  扭力扳手的工作原理是,在电机由行星齿轮减速机制,权力转移到影响头部,影响头和两个凸头驱动转动轴的转动扳手爪,然后完成功率输出。

  The working principle of the torque wrench is that the power of the motor is transferred from the planetary gear deceleration mechanism to the influence head, and the influence head and two convex heads drive the rotating shaft of the wrench claw, and then complete the power output.
  扭矩扳手使用一段时间后,其输出功率必然会下降。随着扳手使用时间的增加,输出功率会不断下降,直至无法工作为止。
  When the torque wrench is used for a period of time, its output power will inevitably decrease. With the increase of wrench usage time, the output power will continue to decline until it can not work.
  电动扭矩扳手
  Electric Torque Spanner
  通过对电动转矩扳手的解体观察,技术人员发现,所有使用过的转矩扳手无一例外地在工作面遭受了严重磨损。磨损工作面是与原工作面成45度角的斜面。冲击力分散后,扭矩扳手内件受力也发生变化。
电动扭矩扳手
  By observing the disintegration of the electric torque wrench, technicians found that all the used torque wrenches suffered serious wear and tear in the working face without exception. The worn working face is an inclined plane with an angle of 45 degrees from the original working face. When the impact force is dispersed, the internal force of the torque wrench also changes.
  电动扭矩扳手
  Electric Torque Spanner
  通过以上观察结论,找出了电动扳手失效的主要原因——轴工作表面磨损严重。因此,要有效地延长电动扳手的使用寿命,就必须解决磨损问题,而由于模具轴上的磨损比冲击头更严重,因此模具轴上的磨损问题是关键。如果能解决这个问题,就能解决冲击头磨损问题。更换整体杠杆轴拆卸,杠杆轴工作面可拆卸。使用一段时间后,可根据磨损情况进行更换。可移动工作面可单独选择合适的材料,通过合理的加工工艺,达到较高的机械性能。
  Through the above observation conclusion, the main cause of the failure of electric wrench - serious wear on the working surface of the shaft was found out. Therefore, in order to prolong the service life of the electric wrench effectively, it is necessary to solve the problem of wear. Because the wear on the die shaft is more serious than that on the impact head, the wear on the die shaft is the key. If this problem can be solved, the problem of impact head wear can be solved. Replace the integral lever shaft and disassemble. The lever shaft working face can be disassembled. After using for a period of time, it can be replaced according to the wear condition. Movable working face can select suitable materials independently and achieve higher mechanical properties through reasonable processing technology.
  以上是电动扭矩扳手制造商为大家整理的相关内容,想要了解更多内容,欢迎访问网站:http://haochahe.com
  These are the related contents of the electric torque wrench manufacturer for you. For more information, please visit the website: http://haochahe.com.

安徽快3开奖直播 75秒快3 75秒快3 安徽快3投注网站 75秒快3开户 极速快3投注网站 北京快3注册 甘肃快3app 极速快3开奖直播 75秒极速快3